| Ref
# |
Pic |
Equipment
Description |
Note |
Sales
$ |
| 17.0084
|
|
Sanborn 8"X60" combo-gang edger w/infeed-outfeed w/tailer, 200 HP motor-solid state GE starter - 25-26 saws-spacers. |
|
$28,000
|
| 17.0105
|
|
Frick 4" X 24" edger, 1 moveable saw (lever), in/out tables, no motor, 3 groove sheave. |
|
$3,000
|
| 17.0112
|
|
A) ---SOLD---Hardy combination edger 6"X42", 100HP electr, 5HP feed W/infeed/outfeed. B) ---SOLD---Morbark 6" 3 saw edger, w/positioner and infeed. C) PHL 6" edger with positioner and horizontal resaw w/positioner, hydr infeed. D) Cornell 6" 2-saw edger, 30 HP. (pic) |
|
POR
|
| 17.0113
|
|
PHL 8" combination bull edger, double arbor, w/infeed table and press for feeding cants into the bull- with electro-pneumatic setworks-10 positions, including ~500 sharpened saws in wooden boxes, 200 HP on bottom arbor and 150 HP on top arbor w/all hydraulics, along with a 100 HP horizontal resaw w/2saws, capacity to 10" wide, W/positioner (4 positions fr 3/4" to 5-3/4"). |
|
POR
|
| 17.0129
|
|
Double arbor PHL Bull edger, Model B8-48, 1990. Capacity of 8"X48". Variable speed feed from 50 to 180 FPM. Feed hydraulically. One motor 150 HP and one 125 HP. 18" saws, many spacers. |
|
POR
|
| 17.013
|
|
HMC Model ED-44 3 saw edger, (one moveable saw), 2 7/16" shaft, 18" carbide blades, hydraulic assist setworks for R.H. moveable saw. Drive on left, moveable saw on right. 42"X6" opening. Air pressure on top rolls(not driven). "Diamond" feed rolls. |
|
POR
|
| 17.0132
|
|
Cornell (1995) 6-36 2-saw edger, laser light, Infeed dead rolls, no outfeed. |
|
$17,000
|
| 17.0135
|
|
Valley 10"X54" double arbor gang edger, guided saws, splined shafts. Saws, spacers, spares. |
|
POR
|
| 17.0138
|
|
A) Valley Machine 9"X54" top arbor combiation edger, splined shaft, thin kerf, guided saws. (no picture) B) Oxford board edger . C) Valley Machine 9" bottom arbor combination edger, climb cut, single feed roll has board saws on left with gang saws on right; the feed roll on the gang side is smaller dia. than the board side so that the feed rate is slower for the gang at any give feed roll RPM. D) Oxford 4" open board edger w?auto tailer and horizontal circular resaw. E) Valley 6"X54" bottom arbor combination edger, split top rolls, strobe .235 blades for gang side, 150 HP, air stack cyl. Setworks, hydr. Powered rolls. |
|
POR
|
| 17.0142
|
|
Valley Machine edger |
|
POR
|
| 17.0143
|
|
PHL 636 Edger, 1 fixed, 1 moveable saw, 50HP motor, air setworks, 5HP variable speed drive. Rebuilt and run-in, excellent condition. |
|
POR
|
| 17.0144
|
|
Kockum 8" bull edger w/guided saws, 300HP, hydraulic power unit, roughly 150 thin kerf saws. Modern edger, rebuilt checked over and painted. Infeed to feed automatically. Machine to grind guides for saws included. Excellent machine for pine/softwood mill. |
|
POR
|
| 17.0147
|
|
A) Valley 10"X54" double arbor edger w/front top roll hold down assembly. B) Oxford board edger. |
|
POR
|
| 17.0149
|
|
PHL E6-48-2 3 saw edger W/motor and tailer. Air setworks, 50HP arbor motor, variable feed motor, 3" to 12" wide capacity. Good condition, spare 4" arbor and spare saws and collars. |
|
POR
|
| 17.015
|
|
Cornell board edger |
|
POR
|
| 17.0151
|
|
Morgan 2-saw edger, 30HP electric. Will do 6" cants. New in 2000, in regular use until 2003, not used since--excellent condition. |
New Listing
|
$10,000
|
| 17.0152
|
|
Morbark 636 gang edger, manual hydraulic setworks, 2 shifting collars, extra blades. |
New Listing
|
POR
|
|
|
|
